Pelanggan YTH.

Saat ini kami memiliki stok baru sejumlah 10 unit Dell PE 860 dan Dell R200 dengan spesifikasi sebagai berikut :

Intel Xeon Conroe 3040 – 3060 (dual core), RAM 2 GB ECC, HDD 2×73 GB SCSI (RAID 0 / 1 avaliable). 5 Public IP (/29), Unmetered IIX Up to 1 Gbps dan Up to 2 Mbps Intl. Harga Rp. 1.750.000/bulan

Intel Xeon Conroe 3040 – 3060 (dual core), RAM 4 GB ECC, HDD 2×73 GB SCSI (RAID 0 / 1 avaliable). 5 Public IP (/29), Unmetered IIX Up to 1 Gbps dan Up to 2 Mbps Intl. Harga Rp. 2.000.000/bulan

Silahkan bagi yang berminat, stok terbatas.

Regards

Dedicated HP DL360 Dual Intel Xeon 3.2 Ghz (Total 4 Core), 4 GB ECC Memory, 2×73 GB SCSI U320, Support RAID 0/1,  2 Ip, 100 Mbps IIX (shared), 1 Mbps Intl (Rack Shared). Hanya Rp. 2.000.000 / bulan.

Free License DirectAdmin ($29) untuk pembayaran per 3 bulan dimuka.

Silahkan kontak kami untuk kesempatan ini di info@indovps.com/YM cybernoc2k3

Jumlah terbatas, hanya 10 unit saja

Maaf limit pemesanan sudah habis, silahkan untuk menghubungi kami untuk pre-order dedicated lainnya

Dedicated HP DL360 Dual Intel Xeon 3.06 Ghz (Total 4 Core), 3 GB ECC Memory, 2×36 GB SCSI U320, Support RAID 0/1, 2 Ip, 100 Mbps IIX (shared), 1 Mbps Intl (Rack Shared). Hanya Rp. 1.750.000 / bulan.

Silahkan kontak kami untuk kesempatan ini di info@indovps.com/YM cybernoc2k3

Jumlah 10 unit.

From the above picture you can see the difference of speeds of different technologies. On a general note it can be said that SCSI is faster than SATA with SATA II at 320 Mbps and normal SCSI operating at 320 Mbps.

Robustness

SCSI is a much robust interface. Almost every manufacturer provides longer warranty on SCSI. SATA drives are not less reliable either. But you should remember that a disk drive has a low failure rate because of increased quality of its head, platters and supporting manufacturing process, not because of certain interfaces.

Connectors

As SCSI has been around longer than IDE, there are more types of connectors and controllers available which can work together with appropriate adapters. There are only limited controllers available for SATA

Manufacturing Cost

SCSI costs much more than SATA or PATA. SATA connections are the cheapest to build.

Interfacing

SCSI interface can be used with control scanners, floppy drives, CD changers and tape drives other than interfacing the hard drives. SATA drives are primarily designed for transferring data between computer and mass storage device such as a hard disk and optical drives.

CPU Utilization

SCSI drives don’t use CPU power to run and leaves more CPU time for the rest of the system. SATA use processor to transfer data.

Compatibility

SCSI drives needs some knowledge to setup and SATA drives also has some problems. IDE drives are most compatible of all.

Hot Swapping

Serial SCSI offers hot swapping like SATA. PATA does not allow hot swapping.

Application

SCSI is mainly optimized for server and SATA are made for desktop applications. But now-a-days SATA drives are finding their way to the servers as they provide a cheaper option. For serious performance seekers 15k RPM SCSI drives are the best though a bit on the expensive side.

Conclusion

Thanks for reading this much long. From the above discussion, I think you have understood that SCSI are best suited for server application and SATA for desktops but SATA drives are becoming mature and perhaps will be a powerful alternative to SCSI

Incoming search terms:

scsi vs sata,scsi harddisk,sata speed harddisk,diferença sata scsi,scsi sata pata hard disk,scsi hard disk interface,scsi hard disk,sata pata scsi comparison,sata pata dan scsi,sata pata and scsi a comparison,sata and scsi hard disk comparission,hcsi hardisk,harddisk ide sata dan scsi,format har disk yang compatible,SSCI hardisk